• Product Details
  • 77 PU Foam Roller Shutter Door Roll Forming Machinery 

          This machine adopts the most advanced technology . The cutting system is automatic fly saw cutting with servo motor .The transmission system is Gear box with universal joint .

            The base frame is more stable compared with the old shutter door roll forming machine . And all the Brand of the PLC control box is Delta .Main components for low pressure electricity: Schneider Germany . So that we can ensure that the roll forming machine has a long service life .

    The advantage of the PU Rolling Shutter Slats Roll Forming Machine.

    1. Energy saving and environmental protection

    Each piece profile of the insulated shutter door is filled with environmentally friendly insulation materials , it can effectively maintain the indoor temperature , save a lot of energy. Energy-saving effect can reach 30%, is the ideal energy-saving environmentally friendly building materials.

    2. Thermal insulation

    The special material and unique structure make it effectively prevent strong lisght and ultraviolet radiation . The temperature of the blocking rate can reach more than 95% .

    3. Noise Reduction

    The PU foam shutter door roll forming machine has no noise when it runns . Also it can reduce the interference of external noise . Protect us live in you peaceful life .

    The Hydraulic Metal Shutter Door Roll Forming Machines component:
    1.Decoiler 1 set 
    2.Guide Feeding device 1 set 
    3.main  forming machine 1 set 
    4.PU Foaming machine 1 set 
    5.Straighten device 1 set 
    6.flying saw cutting machine 1 set 
    7.finished products table 1 set 
    8.PLC control system   1 set 

    Here is the roll forming machine pictures for your reference:

    The Main specification of the Roller Shutter Door Roll Forming Machine

    1. material: aluminm coil plate and colorful galvanized steel 2. material thickness: 0.27-0.4mm, coil width: 140mm
    3. decoiler:3 ton manual 
    4. forming stations: 38 stations
    5. roller material: GCr15
    6. shaft diameter: 40mm
    7. drive way: gearbox drive
    8. frequency conversion decelerating: Delta
    9. forming speed: 8-15m/min 
    10. machine size: 24000mmx600mmx900mm
    11. machine weight: 7 tons

    Clients may meet many problems when using the Galvanized Roller Shutter Door Equipment. We will give you a good solution to solve them and make you free of trouble .

    Such as the following :

    1. what space do we need for the  roll forming machine
    2. the distance of between the roll machine body and decoiler
    3. How to install the steel coil with the manual decoiler
    4. how to adjust the distance of the upper and down shaft
    5. How to cut the steel coil when finish the working
    6. How to set the numbers in control box
    7. How to connect the wiring of roll forming machine
    8. what kind of hydraulic oil should be filled in hydraulic motor box
    9. How many oil should be filled in box
    10. The machine not work automatically.
    11. The cutter not goes up when cut the panel
    12. the panel goes a wrong way in roll forming machine body, not form in one line
    13. Client changed the parameter of encoder, i help them to change the parameter
    14. the panel not stop when reach the length
    15. Motor oil leakage
    16. How to adjust the forming speed of roll forming machine

    77 PU Foam Roller Shutter Door Roll Forming Machinery 

          This machine adopts the most advanced technology . The cutting system is automatic fly saw cutting with servo motor .The transmission system is Gear box with universal joint .

            The base frame is more stable compared with the old shutter door roll forming machine . And all the Brand of the PLC control box is Delta .Main components for low pressure electricity: Schneider Germany . So that we can ensure that the roll forming machine has a long service life .

    The advantage of the PU Rolling Shutter Slats Roll Forming Machine.

    1. Energy saving and environmental protection

    Each piece profile of the insulated shutter door is filled with environmentally friendly insulation materials , it can effectively maintain the indoor temperature , save a lot of energy. Energy-saving effect can reach 30%, is the ideal energy-saving environmentally friendly building materials.

    2. Thermal insulation

    The special material and unique structure make it effectively prevent strong lisght and ultraviolet radiation . The temperature of the blocking rate can reach more than 95% .

    3. Noise Reduction

    The PU foam shutter door roll forming machine has no noise when it runns . Also it can reduce the interference of external noise . Protect us live in you peaceful life .

    The Hydraulic Metal Shutter Door Roll Forming Machines component:
    1.Decoiler 1 set 
    2.Guide Feeding device 1 set 
    3.main  forming machine 1 set 
    4.PU Foaming machine 1 set 
    5.Straighten device 1 set 
    6.flying saw cutting machine 1 set 
    7.finished products table 1 set 
    8.PLC control system   1 set 

    Here is the roll forming machine pictures for your reference:

    The Main specification of the Roller Shutter Door Roll Forming Machine

    1. material: aluminm coil plate and colorful galvanized steel 2. material thickness: 0.27-0.4mm, coil width: 140mm
    3. decoiler:3 ton manual 
    4. forming stations: 38 stations
    5. roller material: GCr15
    6. shaft diameter: 40mm
    7. drive way: gearbox drive
    8. frequency conversion decelerating: Delta
    9. forming speed: 8-15m/min 
    10. machine size: 24000mmx600mmx900mm
    11. machine weight: 7 tons

    Clients may meet many problems when using the Galvanized Roller Shutter Door Equipment. We will give you a good solution to solve them and make you free of trouble .

    Such as the following :

    1. what space do we need for the  roll forming machine
    2. the distance of between the roll machine body and decoiler
    3. How to install the steel coil with the manual decoiler
    4. how to adjust the distance of the upper and down shaft
    5. How to cut the steel coil when finish the working
    6. How to set the numbers in control box
    7. How to connect the wiring of roll forming machine
    8. what kind of hydraulic oil should be filled in hydraulic motor box
    9. How many oil should be filled in box
    10. The machine not work automatically.
    11. The cutter not goes up when cut the panel
    12. the panel goes a wrong way in roll forming machine body, not form in one line
    13. Client changed the parameter of encoder, i help them to change the parameter
    14. the panel not stop when reach the length
    15. Motor oil leakage
    16. How to adjust the forming speed of roll forming machine

77 PU Foam Roller Shutter Door Roll Forming Machinery