• Product Details
  • decking floor making machine

    Product Application:

       The construction roll forming machine produced by these series machine is used for floor decking in building. We need't dismantle the mould after pouring concrete, so we can finish the project as soon as we can. Normally, the raw material for decking floor is glazed galvanized sheet, we neednt decorate the ceiling again, due to it is beautiful enough. This series product is suitable for streel structure factory and public big building.


    Technical parameter
      


    Items

    Specifications

    Material of coil

    Material Width

    1000-1250mm

    Material Thickness

    0.5-1.5mm

    Uncoiler

    5 tons manual

    Forming system

    Rolling Speed

    6-15m/min

    Roller Stations

    22-28stations

    Roller Material

    45# steel

    Material of shaft

    45 steel

    Shaft DIA

    D90mm

    Maim Motor Power

    15kw

    Hydraulic cutting Power

    7.5kw

    Cutting system

    Material Of Cutting

    CR12Mov

    Tolerance

    +-1.5mm

    Electrical control system

    Electric Source

    380V, 50HZ,3 phase or as custer's requirement

    Control System

    PLC

    Way Of Drive

    chain


    Detailed Images:



    Rollers

    In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.

    Roller chrome coated thickness: 0.05 mm.

    Computer Control Cabinet

    It adopts PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

     Hydraulic Station

    It is derived by a Gear Pump. After filling the hydraulic oil into the hydraulic oil tank, the pump could drive the hydraulic cylinder to realize the cutting function.The system includes a set of hydraulic tank, a set of a Gear Pump, two hydraulic pipes .and two sets of Solenoid Valves.

    Power of The Pump:4kw

    Hydraulic oil :40#

     

    Shearing Mechanism

    It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.

    Material of blades: Cr12                                              Components:It contains one set of cutting tools, one hydraulic tank and one cutter machine.

    Entry Beach

    Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.

     


    It is used to support the steel coil and uncoil it in a turnable way. (You can choose manual decoiler or automatic decoiler.)

    Loading capacity:5T

    Inner diameter: 450-508mm

    Packing:

    Main machine is nude, the computer control box is packed with wooden frame.

    Main machine is nude in the container, the computer control box is packed with wooden packaging.

    Our service: 

    This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.

    Company Information:

    Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machines,stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.

    Contact us:

    TEL:+86-18931703260

    Email:serena.xin@hotmail.com    

    http://www.cnxinbo.net    

     

                       



    decking floor making machine

    Product Application:

       The construction roll forming machine produced by these series machine is used for floor decking in building. We need't dismantle the mould after pouring concrete, so we can finish the project as soon as we can. Normally, the raw material for decking floor is glazed galvanized sheet, we neednt decorate the ceiling again, due to it is beautiful enough. This series product is suitable for streel structure factory and public big building.


    Technical parameter
      


    Items

    Specifications

    Material of coil

    Material Width

    1000-1250mm

    Material Thickness

    0.5-1.5mm

    Uncoiler

    5 tons manual

    Forming system

    Rolling Speed

    6-15m/min

    Roller Stations

    22-28stations

    Roller Material

    45# steel

    Material of shaft

    45 steel

    Shaft DIA

    D90mm

    Maim Motor Power

    15kw

    Hydraulic cutting Power

    7.5kw

    Cutting system

    Material Of Cutting

    CR12Mov

    Tolerance

    +-1.5mm

    Electrical control system

    Electric Source

    380V, 50HZ,3 phase or as custer's requirement

    Control System

    PLC

    Way Of Drive

    chain


    Detailed Images:



    Rollers

    In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.

    Roller chrome coated thickness: 0.05 mm.

    Computer Control Cabinet

    It adopts PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

     Hydraulic Station

    It is derived by a Gear Pump. After filling the hydraulic oil into the hydraulic oil tank, the pump could drive the hydraulic cylinder to realize the cutting function.The system includes a set of hydraulic tank, a set of a Gear Pump, two hydraulic pipes .and two sets of Solenoid Valves.

    Power of The Pump:4kw

    Hydraulic oil :40#

     

    Shearing Mechanism

    It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.

    Material of blades: Cr12                                              Components:It contains one set of cutting tools, one hydraulic tank and one cutter machine.

    Entry Beach

    Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.

     


    It is used to support the steel coil and uncoil it in a turnable way. (You can choose manual decoiler or automatic decoiler.)

    Loading capacity:5T

    Inner diameter: 450-508mm

    Packing:

    Main machine is nude, the computer control box is packed with wooden frame.

    Main machine is nude in the container, the computer control box is packed with wooden packaging.

    Our service: 

    This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.

    Company Information:

    Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machines,stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.

    Contact us:

    TEL:+86-18931703260

    Email:serena.xin@hotmail.com    

    http://www.cnxinbo.net    

     

                       



decking floor making machine

floor decking roll forming machine. decking floor roll forming machine.