• Product Details
  • Model:shutter door machine


    Product Application:

    This shutter door machine line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products produced by this  Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices are bright in colored, against fading, resistant to rust, and be widely used in shops, working departments, warehouses, and fire partition. Its strength is three times higher than aluminum alloy door.

    Technical drawing:

     

    Technological process:

    Uncoiler-Feeding-Leveling-hydraulic punching-Hydraulic cutting-Roll forming-Output table

    Technical parameter:

    1.Suitable material

    Color steel sheet , galvanized steel sheet,aluminum sheet

    2.Installation Dimension (L*W*H):     

     6.5m*1.5m*1.4m

    3.Main motor power

    3KW 

    4.Hydraulic station power

    3KW

    5. Hydraulic oil pump

    CB-E 310

    6.Thickness of material

    0.3mm~1.0mm

    7.Diameter of principal axis

    Φ60mm

    8.Material expand width

    60-175mm

    9.Electric tension

    380V 3phase 50HZ or as the customer's requirements

    10.Material of roller

    High grade 45# forged steel plated with hard chrome plating

    11.Controlling system

    PLC

    12.Processing speed 

    8-12m/min(glazed tile is 2-3m/min)

    13.Processing precision within

    1.00mm (depend on design)

    14.Material of cutting blade

    Cr12 mould steel with quenched treatment 

    15.Kind of drive

    0.6 inch chain link bearing model 6210

    16.Roller station

    11-20 Rollers

    17.Roller material

    high grade 45#steel; Cr12 quenching

    18. Leak frame load-bearing

    2T 


    Detailed Images:


    Rollers

    In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.

    Roller Station:11-18rows

    Or custome an customer's requirements Thickness of feeding material:0.3-0.8mm

    Computer Control Cabinet

    It adopts PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

     Hydraulic Station:

    It is derived by a Gear Pump. After filling the hydraulic oil into the hydraulic oil tank, the pump could drive the hydraulic cylinder to realize the cutting function.The system includes a set of hydraulic tank, a set of a Gear Pump, two hydraulic pipes .and two sets of Solenoid Valves.

    Power of The Pump:4kw

    Hydraulic oil :46#

     Material of the cutting:Cr12Mov with quenched treatment.

    It can decide cut panel dimension acoording to the hydraulic drive and PLC computer control system. 


     


    It is used to support the steel coil and uncoil it in a turnable way. 

    Loading capacity:1-2T

    Inner diameter: 450-508mm

    Packing:

    Main machine is nude, the computer control box is packed with wooden frame.

    Main machine is nude in the container, the computer control box is packed with wooden packaging.

    Our service: 

    This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.

    Company Information:

    Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machines,stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.

    FAQ

    Q: Do you sell only standard machines?

    A: No, most of our machines are built according to customers specifications, using top brand name components.

    Q: What size decoiler can you supply us with?

    A: From 5-ton decoiler to a 25-ton motorized hydraulic decoiler

     Q: How to visit your company?

    A:a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.

        b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.

     Q: What can you do if the machine broken?

    A:Our machine's warranty period is 18months,if the broken parts can't repair,we can send the new parts replace the broken parts freell,but you need pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

    Contact us:

    TEL:+86-18931703260

    Email:serena.xin@hotmail.com    

    http://www.cnxinbo.net    

     

                       


    Model:shutter door machine


    Product Application:

    This shutter door machine line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products produced by this  Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices are bright in colored, against fading, resistant to rust, and be widely used in shops, working departments, warehouses, and fire partition. Its strength is three times higher than aluminum alloy door.

    Technical drawing:

     

    Technological process:

    Uncoiler-Feeding-Leveling-hydraulic punching-Hydraulic cutting-Roll forming-Output table

    Technical parameter:

    1.Suitable material

    Color steel sheet , galvanized steel sheet,aluminum sheet

    2.Installation Dimension (L*W*H):     

     6.5m*1.5m*1.4m

    3.Main motor power

    3KW 

    4.Hydraulic station power

    3KW

    5. Hydraulic oil pump

    CB-E 310

    6.Thickness of material

    0.3mm~1.0mm

    7.Diameter of principal axis

    Φ60mm

    8.Material expand width

    60-175mm

    9.Electric tension

    380V 3phase 50HZ or as the customer's requirements

    10.Material of roller

    High grade 45# forged steel plated with hard chrome plating

    11.Controlling system

    PLC

    12.Processing speed 

    8-12m/min(glazed tile is 2-3m/min)

    13.Processing precision within

    1.00mm (depend on design)

    14.Material of cutting blade

    Cr12 mould steel with quenched treatment 

    15.Kind of drive

    0.6 inch chain link bearing model 6210

    16.Roller station

    11-20 Rollers

    17.Roller material

    high grade 45#steel; Cr12 quenching

    18. Leak frame load-bearing

    2T 


    Detailed Images:


    Rollers

    In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.

    Roller Station:11-18rows

    Or custome an customer's requirements Thickness of feeding material:0.3-0.8mm

    Computer Control Cabinet

    It adopts PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

     Hydraulic Station:

    It is derived by a Gear Pump. After filling the hydraulic oil into the hydraulic oil tank, the pump could drive the hydraulic cylinder to realize the cutting function.The system includes a set of hydraulic tank, a set of a Gear Pump, two hydraulic pipes .and two sets of Solenoid Valves.

    Power of The Pump:4kw

    Hydraulic oil :46#

     Material of the cutting:Cr12Mov with quenched treatment.

    It can decide cut panel dimension acoording to the hydraulic drive and PLC computer control system. 


     


    It is used to support the steel coil and uncoil it in a turnable way. 

    Loading capacity:1-2T

    Inner diameter: 450-508mm

    Packing:

    Main machine is nude, the computer control box is packed with wooden frame.

    Main machine is nude in the container, the computer control box is packed with wooden packaging.

    Our service: 

    This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.

    Company Information:

    Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machines,stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.

    FAQ

    Q: Do you sell only standard machines?

    A: No, most of our machines are built according to customers specifications, using top brand name components.

    Q: What size decoiler can you supply us with?

    A: From 5-ton decoiler to a 25-ton motorized hydraulic decoiler

     Q: How to visit your company?

    A:a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.

        b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.

     Q: What can you do if the machine broken?

    A:Our machine's warranty period is 18months,if the broken parts can't repair,we can send the new parts replace the broken parts freell,but you need pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

    Contact us:

    TEL:+86-18931703260

    Email:serena.xin@hotmail.com    

    http://www.cnxinbo.net    

     

                       


shutter door machine

shutter door making machine, rolling door making machine