Tile machine equipment features: the equipment has the advantages of operation, maintenance, maintenance and mechanical debugging, mold replacement is easy. Color steel roof tile forming machine equipment manual billet, billet taking work procedures: In equipment before use, should check whether all connections, installation of bolts and nuts are tight, or so the case should be put in sufficient lubrication oil, energized to start the machine commissioning, first run idle look carefully, with and without vibration, noise, whether oil window to oil, whether parts movement coordination, everything is all right to install mold, mold when installation, must cut off power supply, move the motor belt by hand or big gear, make workbench inversion, and makes the slide up to the highest point, it is better to support an object between the workbench and slide underside, slippery with natural whereabouts, cause an accident.
Roll Forming Machine
This machine use the mold to an upper die and six lower die of the same size, first install the upper die and a lower die, lower die installed directly on the six-party wheel work bench, the upper die is installed in slide on the bottom, and place the right thickness of plate, ensure upper and lower mould clamping, around four uniform clearance, required the thickness of the tile billet is equal to the distance between the upper and lower mold. Then the above model shall prevail, the table shall be transposed, and the remaining five modules shall be installed. Only after the upper and lower modules are all installed can the vehicle be started for tile pressing. Automatic feeding and billet taking work procedure: mold installation and main engine test run are the same as above, then start air compressor, vacuum pump, extruder, tile cutting machine, feeding machine, tile pressing machine, main engine and roll forming machine, stop the extruder first, and then stop the rest of the equipment.