Daily maintenance of color steel wall panel board forming machine

scanning:31 author: from: time:2019-09-24 classify:Latest News
Color steel wall panel board forming machine is used to make mechanical equipment for color steel plate forming. In the north of China, most of them are called pressure washers. Because color steel plates are mostly used for color steel houses and placed on the roof, color steel plates are also called color steel tiles, and color steel tiles are pressed by mechanical equipment.

Color steel wall panel board forming machine is used to make mechanical equipment for color steel plate forming. In the north of China, most of them are called pressure washers. Because color steel plates are mostly used for color steel houses and placed on the roof, color steel plates are also called color steel tiles, and color steel tiles are pressed by mechanical equipment. Color steel forming equipment is also known as a tile press. Color steel forming equipment can be divided into many models according to the color steel plates produced. However, according to the use of the formed color steel plate, it can be roughly divided into wall panel materials and roof panels. Wall panel materials are generally common single-board color steel plates, so the equipment used for production is also a relatively common single-plate molding equipment. The number mentioned on the model here generally refers to the effective coverage area of the formed color steel plate. Roofing panels can be divided into color steel glazed tiles, angular slats and so on. The equipment used to produce such a type of plate is generally called a color steel glazed tile device or a color steel roof tile board forming machine. Different regions have different names, but the same meaning is expressed. The meticulous distinctions are generally distinguished by the effective coverage area of the formed sheet.

First, summarize the daily maintenance process of color steel forming machine:

(1) The electrician needs to be familiar with the type and performance of the electrical circuit and electrical equipment in the workshop. The performance of the electrical equipment is not fully understood, and it is forbidden to take risks.

(2) Electricians should regularly check the condition of cables, motors, electric consoles and other equipment on a daily basis. If problems are found during inspection, they need to be dealt with in a timely manner. When checking the motor temperature, first check the power and then test it with the back of the hand.

(3) Partial power outages, when the electrical body is close to 0.9 meters from the maintenance personnel, dry wood rubber or insulation material shall be used for reliable temporary obstruction.

(4) When using a power tool, there is protection against electric shock.

(5) Except for temporary construction electricity or temporary measures, temporary wires are not allowed, no lights are allowed to be hanged, and stable switches and sockets are used for instrument tools and welding machines. The original electrical lines must not be altered without authorization.

(6) When any conductive part of the equipment is grounded, before the power is cut off, except for the rescue of the electric shock, it is not allowed to approach, leaving the room 4 meters away from the surrounding, and the room is 1.8 meters away from the stride voltage damage.

(7) Regularly overhaul and repair electrical equipment according to regulations, and all unused electrical equipment lines must be removed.

(8) When using a ladder, the angle between the ladder and the scene is 60 degrees. When using a ladder in a cement scene, there must be anti-slip measures and someone should hold the ladder.

(9) When repairing the color steel equipment, pull down the switch and the knife. It is necessary to hang the warning sign “No contract, some people work” at the switch and the knife. On the covered fence of the charged equipment and the aisle where the passage is prohibited, Warning signs such as “stopping, high voltage danger” should be affixed, and the warning sign of “should be working here” should be hung at the work place.

Color steel forming machines are very simple, mainly vibration machines and plastic molds, with little investment. However, the production rate is very low. Because of the use of relatively thin concrete materials for vibration molding, rather than compaction, there are more internal pores, so the folding resistance of this color steel tile equipment is poor. In addition, the life of plastic molds is also very limited, making the cost and price of such presses high and not competitive. So far, it is not popular with users, and there are few applications. However, as a color steel tile equipment, the color processing method is very distinctive. The surface of the color steel equipment produced by this method can not spray the sealant, does not make any surface treatment, and has bright color, achieves the smoothness of the glazed tile, and is not easy to produce moss, and the color life is similar to the overall color tile. When the flatness of the concrete surface is different, different visual effects will be exhibited. When the surface is flat, the surface is smooth and shiny. For example, granite and terrazzo ground are polished, the effect is different from that before grinding, and even the radiance can be achieved. . Using the smooth surface of the mold of the tile machine, the concrete and the pigment are mixed and poured into a plastic mold to form a vibration. After curing for 3 to 5 days in the mold, the plastic mold is peeled off to obtain a smooth and bright colored concrete surface as the plastic mold. It should be noted that the front side of the plastic mold and color steel equipment needs to face downward to eliminate the air gap or air bubbles on the surface of the color steel equipment, and improve the compactness and smoothness of the surface of the color steel tile equipment.

Our company specializes in the production and export of various types of roll forming machines and rolling door making machines, etc. With advanced manufacturing technology and service experience, we are deeply trusted by overseas customers. If you have any needs, please feel free to contact us.

shutter door machine